This shower door bottom seal is intended for frameless glass doors with a thickness of approximately 0.95 cm (3/8 inch) and a standard length of about 91.44 cm (36 inches). It is made from clear vinyl material with a flexible structure that fits along the lower edge of glass panels. The strip is inserted directly into the bottom channel of compatible glass doors without the need for additional fixing components. It can also be shortened using cutting tools such as a utility blade or similar tools to match shorter door lengths. Once installed, it follows the lower edge contour of the glass panel and maintains contact with the door base area during movement. The material is suitable for repeated sliding or swinging motion of glass doors in enclosed wet-area environments. It helps reduce water movement from the lower gap of the door during normal use conditions. The transparent appearance allows it to blend with glass surfaces without affecting visual continuity. It is applied along straight lower edges and can adapt to slight variations in channel width depending on installation type. The strip is often used in bathroom glass door systems where lower edge spacing exists between moving panels and floor surfaces. Its flexible form allows it to remain in position during frequent opening and closing cycles. The product is supplied in a single piece and adjusted according to required installation length before placement into the frame channel.
